Hazardous area classification is required where flammable gases, vapours or combustible dusts may create an explosive atmosphere.
The purpose is to determine where those conditions may occur and what level of protection electrical equipment must provide before it is selected and installed.
For industrial and commercial sites, this classification helps ensure electrical equipment is suitable for the environment in which it will operate.
What Is Hazardous Area Classification?
Hazardous area classification assesses where an explosive atmosphere may occur, how often it may be present and the type of flammable substance involved.
The assessment is used to define hazardous zones within a site.
These zones then inform decisions about electrical equipment, installation methods and the level of protection required in each location.
Why Classification Comes Before Equipment Selection
Electrical equipment can produce heat, arcs or sparks during normal operation or under fault conditions.
In an ordinary environment, this may not present an explosion risk. In a hazardous area, unsuitable equipment can become an ignition source.
For that reason, equipment cannot be selected only according to its normal electrical function. The area classification needs to be understood first so that the equipment is appropriate for the zone and the atmosphere in which it will operate.
What Factors Influence the Classification?
Hazardous area classification depends on the actual conditions at the site.
Factors can include:
- the type of flammable gas, vapour or combustible dust present;
- where a release could occur;
- how often a release may happen;
- how long an explosive atmosphere may remain present;
- ventilation and dispersion conditions;
- the extent of the affected area;
- the ignition characteristics of the substance involved.
Different parts of the same facility can therefore have different classifications.
Where Can Hazardous Areas Occur?
Hazardous areas can occur where flammable substances or combustible dusts are stored, transferred, processed or generated.
Examples include:
- fuel storage and dispensing areas;
- chemical processing and storage facilities;
- paint and coating operations;
- wastewater treatment facilities;
- grain handling and storage;
- food processing areas where combustible dust may be present;
- manufacturing processes involving flammable substances.
The presence of these materials does not automatically make an entire facility a hazardous area. Classification identifies the specific locations where additional electrical controls are required.
How Classification Affects Electrical Equipment
Once an area has been classified, electrical equipment can be assessed against the requirements of that location.
This may apply to equipment such as:
- motors;
- lighting;
- switches;
- sensors;
- control panels;
- junction boxes;
- cabling systems;
- instrumentation.
Equipment installed within a hazardous area may require specific explosion-protection characteristics and certification appropriate to the zone and atmosphere.
Standard electrical equipment should not be assumed to be suitable for a hazardous area simply because it performs the required function.
What If an Existing Area Is Classified Later?
Hazardous area requirements can also affect existing facilities.
Processes may change, different substances may be introduced, or an area may be formally classified after electrical equipment has already been installed.
In these situations, the existing installation may need to be assessed to determine whether the equipment and wiring remain suitable for the classified area.
This is particularly relevant in older industrial facilities where the operating environment has changed over time.
Hazardous Area Electrical Work in Queensland
Hazardous area installations involve additional electrical requirements because inappropriate equipment or installation methods can introduce ignition risks.
Depending on the installation and work being carried out, requirements may apply to equipment selection, installation, inspection, verification and documentation.
For facility owners and operators, hazardous area electrical work therefore needs to be coordinated around the site’s classification and the equipment installed within it.
GAP Industries North Queensland provides hazardous area electrical services for industrial and commercial facilities in Townsville and across North Queensland, including hazardous area electrical installation, maintenance, inspection and associated documentation.